Pre-installation Preparations
Before installing the tractor compressor, the following preparations are required:
Tool Preparation: Ensure you have the necessary tools such as wrenches, screwdrivers, and lubricant.
Accessories Inspection: Verify that the compressor and its accessories are complete and undamaged.
Mounting Surface Cleaning: Remove oil and impurities from the tractor mounting location.
Reading the Instruction Manual: Understand the compressor's technical parameters and installation requirements.
Compressor Installation Procedure
Follow these steps for installation:
Positioning Installation: Place the compressor in the designated position, ensuring alignment with the transmission system.
Securing Bolts: Use appropriate bolts to secure the compressor to the tractor.
Connecting Piping: Correctly connect the inlet and outlet piping.
Belt Adjustment: Adjust the belt tension to ensure smooth transmission.
Post-Installation Testing and Inspection
After installation, the following checks and tests are required:
Operational Test: Start the tractor and observe whether the compressor runs smoothly.
Pressure Test: Check if the compressor reaches its rated operating pressure.
Leakage Check: Use soapy water to check for leaks at all connections.
Lubrication Check: Ensure the lubrication system is functioning properly and the oil level is within requirements.